STL system-detail-velk-vpravo 

STL self-bearing system

The self-bearing system STL with two sturdy guide rails is designed for fast external blind mounting to a ready-made space under the façade. The external blind is firmly fixed to the guide rails using special brackets, thus forming one self-supporting unit to be mounted at a time. After mounting, an aluminium or plastic backing is inserted in the guide rails of the blind to guide the guiding pins of the slats.
Important: This system is designed for external blinds up to 2,300 mm in width. If this size is exceeded, the installer should provide additional brackets at the top of the blind.

Important

This system is designed for external blinds up to 2,300 mm in width.
If this size is exceeded, the installer should provide additional brackets at the top of the blind.

External blinds available as the STF self-bearing system:

  • C-80, C-65 (C-shaped slats)
    • Z-90, Z-70 (Z-shaped slats)
    • S-90 (S-shaped slats)
    • F-80 with guiding rails (F-shaped slats)

Advantages of STL self-bearing system

  • Blind mounted without compromising the window frame
    • Much faster installation of the blind

DEtails

operating method

  • crank
  • motor

Greater convenience can be achieved by connecting to automatic sun/wind controls.

basic technical parameters

Control type

Minimum widht of blind

Maximum area of blind

crank

400 mm

8 sqm

motor

600 mm

8 sqm

Maximum width of blind

2300 mm

Maximum height of blind

3500 mm

Colour design of slats

Range of colours depends on a type of chosen slat (S, Z, C, F). Colour swatches can be found at each type of blinds.

references

SIMILAR products

downloads

What we offer to our customers

ŽALUZIE NEVA s.r.o., Háj 370, 798 12 Kralice na Hané
Company Reg. No.: 26301270, Tax ID No.: CZ26301270, File No. C 42544 maintained by the Commercial Court in Brno

Phone: 588 003 550 E-mail: nevapv@nevapv.cz

Map contacts POWDER COATING PLANT

Copyright © 2016 ŽALUZIE NEVA s.r.o. all rights reserved.